Introduction

The Magnetic Sign Series is a slimline interchangeable sign system with aluminum Inserts that can be easily removed and replaced as needed.

Single or multiple Insert signs are possible. Magnetic Signs accept removable aluminum Inserts and Panels onto which you can apply your copy and graphics.

The panels can be removed with the use of an Insert Removal Tool or a Suction Cup.

How it works

Simply attach the Suction Cup to the aluminum Insert or Panel you wish to change over and pull it away from the backing panel. The plate will release from the Frame. 

Alternatively, use our Insert Removal Tool. Slide the blade in between the Frame and the insert and
lever the insert out.

To replace, simply slip the aluminum Insert or Panel back into position within the frame.

Sizes

The Magnetic Sign Series is available in a wide variety of sizes.

You can design your sign using our standard width and height sizes. The combination of Standard Aluminum Inserts / Panels is up to you. Design the sign to suit your copy and graphics needs.

Magnetic Signs are offered with 2 different frame choices and 2 different Insert choices.  


FRAMES:
 

2 Sided Frame Sign:
 

Suitable for signs from 1 5/8" High up to 47" High 

* Standard Aluminum Inserts: These extruded Inserts will be flush with Frame.

4 Sided Frame Sign:

Suitable for signs with an overall height of 6" and higher.

The 4 Sided Frame is suitable for 2 different types of Inserts. 

* Standard Aluminum Inserts: These extruded Inserts will be flush with Frame
* Aluminum Panel Inserts: Aluminum Panels are 1/16" thick and sit inside the frame (shy of the front of the frame)

 

INSERT HEIGHT OPTIONS:  

For 2 Sided Frames:    

Standard Aluminum Insert sizes
:
Standard Insert sizes in inches include:
13/16", 1 5/8", 2 7/16", 3 1/4", 4 1/8", 4 15/16" .......increasing in multiples of approx. 13/16" to a maximum
single Insert height of 47 1/8"

For 4 Sided Frames:  Choose From 2 Insert Types below

Standard Aluminum Insert sizes:
Standard Insert sizes in inches include:
13/16", 1 5/8", 2 7/16", 3 1/4", 4 1/8", 4 15/16" .......increasing in multiples of approx. 13/16" to a maximum
single Insert height of 47 1/8"

Aluminum Panel sizes:
2" ,4", 6",  8", 10", 12", 14" and so on. Custom sizes are available.

Note: We recommend that any single Insert Panel is no greater than 40" W x 40" H


SIGN WIDTHS: 

Sign Width Options: For signs with 2 Sided and 4 Sided Frames  

We recommend the following width sizes: 

8", 10", 12" 14", 16", 18", 20", 24", 30", 35", 40", 45", 50"

Other sizes available on request, please contact us with your preferred sizes.

Finishes

Frame -        Aluminum - Clear anodized finish 

Inserts -       The standard finish is clear anodized aluminum

Alternative Finish -     Painting - Both the Frame and the Inserts or Panels can be painted if required.

 

Installation & Mounting

Wall Mount or Door Mount

Desk Mount

Flag Mount / Projecting

Suspended signs

Cubicle Mount

Freestanding Signs

Mounting

The symbols above indicate the mounting options available for the Magnetic Sign Series.
Please contact Systech Signage for more detailed information.

Installation

The Magnetic Sign Series can be attached to a substrate with silicone and double-stick tape.
It can also be supplied with pre-drilled holes for countersink concealed screw fixing on request.

Suitable Uses

The Magnetic Sign Series is suited to a wide range of applications.

Suitable for interior use, some applications include:

  • Door Signs
  • Room Signs
  • Departmental Signs
  • Directional Signage
  • Wayfinding Signage
  • Personnel Signs
  • Meeting Room Signs
  • Staff Identification